3/10/2024 0 Comments Miroir micro projector m20 reviewNOTE: After syncing with the projector you may see your device’s screen being mirrored by the projector. Allow the projector 15 to 20 seconds to fully start up and sync with your device.If this is the first time you are using the projector, and the date code stickered on the underside of the device is smaller than 18285, you will need to activate the projector with the activation code from your sales receipt.Power on the projector by flipping the power switch to the on position.If no external speaker is connected, the projector's internal speaker will be used for audio. If desired, connect a speaker to the 3.5mm audio out jack.The following help articles will help you determine how to connect a variety of popular phones, laptops, tablets, streaming devices and other devices to your Miroir projector:.NOTE: Some devices may require an adapter to connect to your device. Connect the included HDMI cable to the HDMI port on the projector and the other end to your device.IMPORTANT: Fully charge the battery before the first use (approximately 3-4 hours). To power the projector with the built-in battery, simply turn the projector on.Once connected, the power indicator light will illuminate red on the projector to show it is connected to power. To power the projector with the Micro USB to USB cable, connect the Micro USB to the projector’s and plug the other end into a USB port.The projector can be powered using the included Micro USB to USB cable or the built-in battery.The blue system indicator light will come on if the battery power is getting low. The built-in battery is charged using the included Micro USB to USB cable. Operating the Projector Charging the Battery This button is a small recessed button, so you will need something small, such as a paper clip, to press the button.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |